Hello All,
Today I want to talk about Schematic and PCB layout share. Joker Eco-System is not only Open Source, but Open Hardware too, and I want to start with the most ready module first – “Joker TV” (stand alone version). I have started an evaluation of Upverter project for Schematic&PCB sharing. You can open this link (opens in new tab) to observe “Joker TV” Schematic&PCB. Be patient though, as it can take about 2 minutes to load and display the project. After all you should see the PCB layout like on the screenshot below. You can also use the top menu to switch to a schematic view.
“Joker TV” Schematic and PCB
“Joker TV” actual hardware (Rev. 1.0)
Or you can download current schematic and PCB design here – joker-tv-usb-rev1.2
Schematic and PCB layout shared under Creative Commons Attribution-ShareAlike 4.0 (CC BY-SA 4.0) license. This license allows to remix, transform, and build upon the material for any purpose, even commercially. If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original. You must give appropriate credit, provide a link to the license, and indicate if changes were made.
“Joker TV” project can be forked inside Upverter. This allows collaboration between engineers on Joker Eco-System. But I need your opinion. If you have any actual hardware design experience please vote below:
I need your feedback to plan further steps as well. Should I continue switching to upverter.com or just share files (Pulsonix EDA) to github.com ?
Also, I have prepared a video with demonstration of signal tracing on “Joker TV” with upverter.com:
I’m planning a series of posts about Joker Eco-System hardware and software. Here are the first three:
Joker TV, FPGA Verilog/VHDL code
Joker TV, Linux/OSx/Windows drivers and apps
Joker TV, manufacturing (Technical and financial aspects)
And if you want to buy please place online order.
Stay tuned for more !
I use "Floridian Unlimited" prototype in this video. 400W and 1000W models are planned. For instance, 1000W model can gives…
Open eCar Open Source Software for Electric Vehicle (EV) Open eCar project is open source software for electric car. The…
Joker TV hardware functional testing with OpenHTF Functional Testing of PCBs is always used as a final manufacturing step. Functional…
Following TS dumps created on January 2018 in Changsha, Hunan Province, China. DTMB dump (722MHz) sands-722mhz.ts (50MB) This stream plays without problems…
Hello everybody! This post describes satellite transponders (DVB-S/S2) blind scan with Joker TV’s universal USB DTV receiver. Firstly, I will…
Hello everybody, this post describes data transfer over USB from Joker TV to a host using high bandwidth USB isochronous transfers…